Conveying assembly line: Conveying chain should be the most common kind of industrial chain. In the industrial production process, especially in many food processing, conveyor chains are used in an assembly line, with a wide range of use and high frequency of use. Therefore, wear failures often occur. If the use method is improper, Will cause great damage to the chain.
Roller assembly lines, belt assembly lines, and assembly lines are the most common types in industrial production workshops. For different production processes, suitable assembly line equipment should be selected. In order to improve production efficiency, its value can be fully reflected. For the previous several kinds of assembly lines, its installation work is very important before use, which directly affects its use effect. Then how to install the drum assembly line correctly? Let's follow the editor to find out.
1. Lay the wiring trough and connect the air source of each transmission unit. Align and level the transmission line body. Electrical and power line signal installation.
2. Site positioning (marking) The assembly line rack is installed with large feet, and the connecting rods are placed in order on the site that has been positioned.
3. Install the electric knife socket (24V), fuse and hook on the guard plate, and connect the electric wire between the electric knife socket and the white wire. Pay attention to the direction of the electric knife socket, with the raised side facing downward.
4. Before installing the guard plate, use 5mm thread to turn the thread on the installation position of the assembly line shelf guard plate, install the wire trough, guard plate, release the wire trough wire and connect to the 220V socket.
5. Line body leveling can be leveled by building line, the leveling height can be 0.625m, install the cable trough cover and fix it with tape.